Hanging barn lights – You may also have to travel a pendant light if you use the dining room for a different purpose, and the pendant is too low in the room. First, turn off the power to pendant lights on the panel main breaker. Then, remove the canopy that covers the electrical box in the ceiling. Take the pendant from the power supply. Before removing the wire nuts, use black electrical tape and label the wire that connects to the black power supply wire, remove wire nuts from both wires.
Loosen the screw collar loop of threaded pipes or nipple attached to the fixture crossbar. Remove the desired amount of chain links, to raise the hanging barn lights, by means of the chain tongs. Open associativity and remove them to raise the pendant. Then, open the link attached to the screw collar loop.
Open this link will allow you to remove the length of the chain right from the hanging barn lights. Set the chain to screw collar. Thread the electric wire through the nipple to the electric field. Connect counterpart to the power supply. Then, remove the screw collar loop on the nipple. Covering the electrical box with canopy and keep it by tightening the nut on the screw collar loop. And the last, turn the power back on at the main panel breaker.