Pole barn design ideas – Paint a pole barn can add not only a splash of color, but years of life of the structure. When painting, always remember to do it right the first time is cheaper than doing it over. With an investment of time and a high quality exterior paint, the investment in your pole barn reaps the benefits for years to come.
Paint a metal pole barn design ideas, remove loose paint with a paint scraper or a power washer placed on a setting that will remove the paint without damaging the surface. Clean the stables with a solution that fits to the surface. Mix one part distilled white vinegar with three parts of water for cleaning the galvanized steel. Mix a simple solution of bleach and water to kill any mildew. Sand any rust from metal with a disk sander using grinding discs of at least 80- grit. Sand until fulfilled the rust remove or pure metal is visible.
After that to paint a metal pole barn design ideas, prepare the surface. Rent or borrow proper scaffolding and ladders, to gather them where needed, before you begin. Note any precautions when using this equipment. Cover plants, landscaping, windows, doors, etc. Using drop cloths, masking tape and plastic sheets to protect these areas from paint. This step is particularly important if you use a paint sprayer, protect against splashing. Prime areas where rust was present with an anti-corrosive primer paint. These primers can be purchased in quartz, gallons and spray cans. Spot-prime these areas as needed.